Sale!

CSCE 489/689 – Computational Photography Programming Assignment 5

$30.00

Category:
5/5 - (2 votes)

CSCE 489/689 – Computational Photography
Programming Assignment 5

1 Goal
The goal of this project is to become familiar with the seam carving approach. Seam carving is a technique
to “retarget” (smart resize) images; the technique preserves the content in order of its importance in the
image (as defined by some energy function). It was introduced in 2007 (video, paper) by Shai Avidan and
Ariel Shamir. Wikipedia has a good overview of the algorithm.
2 Starter Code
Starter code (in both MATLAB and Python) along with the images can be downloaded from here. Note
that, expected results for a few images are included in the “Results” folder.
3 Main Task
The main task involves implementing the seam carving approach. The goal is to create two resized version
of each input image; 1) reduce the width by a factor of 2, and 2) reduce the height by a factor of 2. As
discussed in the class, height reduction can be done by simply rotating the image (or the energy matrix) 90
degrees (you can use imrotate in MATLAB or a similar function in Python). For this task, you only need
to generate two resized images for the first three images in the package. The forth image is related to the
extra credit part.
In addition to the provided examples, you need to show one image of your own which demonstrates
the failure case of the approach. You need to properly discuss why the method fails on your example in the
report. You are free to reduce the width or height by any factor of your choosing for this extra image.
To implement seam carving, you need to do the following:
1. Compute the energy matrix for your image. Use the energy function discussed in the class which
is the sum of absolute gradients in x and y directions. Make sure you convert the color images
into grayscale (using rgb2gray in MATLAB or a similar function in python) before computing the
gradients.
2. Find the best (lowest energy) seam using dynamic programming:
• Make a scoring matrix (M) the size of your image initialized with the values in the energy
matrix (E), i.e., make a copy of your energy matrix.
• Set the values of every entry in the matrix except for the first row by adding to it the minimal
value in any of the cells above it in the seam: M(x, y) = E(x, y) + min[M(x − 1, y −
1), M(x, y − 1), M(x + 1, y − 1)], where M(x, y) is the cost of the lowest-cost seam going
through that point. You’ll have to do this in an order such that M(· · · , y − 1) is defined at the
time it’s evaluated – row by row works. Also beware boundary conditions.
• Find the minimal value in the bottom row of the scoring matrix. This is the bottom of the
optimal seam.
• Trace the seam from the bottom by following the smallest value in any of the positions above it
in the seam.
3. Remove that seam in the image
4. Repeat steps 1 to 3 on the new image. Note that you have to recompute the energy matrix each time
to take into account new edges added by the seam removal.
1
4 Extra Credit
Incorporating Mask – The forth example contains faces and simple seam carving implemented in the main
task, will not work on this example. To avoid this problem you need to incorporate the mask (provided),
which marks the faces, into the energy function. In this way, the method will not choose the seams that go
through the face and preserve them in the retargeted image.
5 Write Up
For each result, you should show the input image and the two resized images (reducing width and height).
You also need to include one example of your own, where the method fails to generate reasonable results.
You need to properly discuss why the method fails on this example. If you implement the extra credit part,
show the result with and without the mask (four images) in addition to the input image on the forth example.
Describe how you implemented the assignment. Discuss any problem you faced when implementing the
assignment or any decisions you had to make.
6 Graduate Credit
Graduate students have to do the extra credit.
7 Deliverables
Your entire project should be in a folder called “firstname lastname”. This folder should be zipped
up and submitted through e-campus. Inside the folder, you should have the followings:
• A folder named “Code” containing all the codes for this assignment. Please include a README file
to explain what each file does if you add any other files to the starter code.
• A report in the pdf format. Make sure you write your name on top of the report. Also make sure
the pdf file is under 5 MB.
Make sure you exclude all the results and original images from your submission.
8 Checklist
Make sure you can check all the items below before submitting your assignment. You will lose 5 points for
each item that cannot be checked.
The root folder is called “firstname lastname”. Note between first and last name.
Inside the root folder, there is a folder called “Code” that contains your source code. Also make sure
the report is in the root folder.
The folders “Images” and “Results” are not included (you only submit your codes and a report).
Name written on top of the report.
The report is in pdf format and the file is under 5 MB.
9 Ruberic
Total credit: [100 points]
[70 points] – Seam carving
[10 points] – Include one example of your own, where the approach fails
[20 points] – Write up
Extra credit: [10 points]
[10 points] – Incorporating Mask
2
10 Acknowlegements
This project is derived from James Hays Computational Photography course with permission.
3

PlaceholderCSCE 489/689 – Computational Photography Programming Assignment 5
$30.00
Open chat
Need help?
Hello
Can we help?