Lab 3 — Using the GPU


Rate this product

ECE 459: Programming for Performance
Lab 3 — Using the GPU

In this lab, you’ll learn how to improve performance of a convolutional neural network
(CNN) by using the GPU to do some of the work.
Learning Objectives:
● Become familiar with running code on the GPU
● Learn how to use the CUDA interface
GPUs were originally designed to accelerate computer graphics (hence the name,
Graphics Programming Unit), but their architecture makes them suitable for a wide
range of tasks that can be parallelized. There are two major programming interfaces
between the CPU and the GPU — OpenCL and CUDA. While OpenCL is more portable
and runs across a wide range of GPUs, CUDA usually offers better performance and is
very widely supported. It’s also easier to use. The biggest limitation of CUDA is that it
only runs on NVidia GPUs.
The typical CUDA workflow consists of having the CPU initialize the GPU, copy data
into the GPU memory, invoke the code on the GPU (which is called a “kernel”), and
copy the results from the GPU back into CPU memory. In this lab, the CPU portion of
the workflow is handled by a library of Rust bindings called RustaCUDA. The GPU
kernel is programmed in CUDA-C, a language similar to C++ with none of Rust’s safety
guarantees. As such, calling a CUDA kernel from Rust is an unsafe operation and you
must carefully coordinate between your Rust code and CUDA-C code to avoid
undefined behaviour.
You can find more information about the CUDA-C language here:
A Convolutional Neural Network (CNN) is a machine learning algorithm that takes an
image and passes it through multiple layers for processing, producing a single vector of
values as output. In this lab, we’ll be using a simplified version of a CNN that consists of
only three layers. The inputs to the CNN are the 100×100 matrices that represent
The first layer of the CNN is a Convolution layer consisting of 10 neurons, each
containing a 5×5 matrix called a filter. Each neuron divides the input image into 5×5
sections and performs a dot product between its filter and each section of the input,
producing a 20×20 output matrix of products.
The second layer is a Rectified Linear Unit (ReLU) layer, which sets any negative
values in the Convolution layer output to zero.
The third layer is the Output layer which consists of 10 neurons, each containing a
4000×1 vector called weights. Each Output neuron flattens all the matrices’ output from
the previous layer and concatenates them, forming a 4000×1 vector that it multiplies
with its weights via a dot product. Since each Output neuron produces a single value,
the entire Output layer produces an output vector of 10 values.
The Software
Your program reads in a CNN description and a number of 100 x 100 matrices
(representing images), and runs the neural network by feeding the matrices through the
CNN. The program writes its results to an output file, and reports the elapsed number of
microseconds. The output files contain the output vectors for each input matrix.
All the data files (input, output and CNN descriptions) are in CSV format, which is
basically just a text file where every line contains values separated by commas (hence
the name, Comma-Separated Values).
We provide you with some starter code, including a file (which you will not need
to modify), a file containing the CPU-based implementation, and a file
containing a skeleton for the GPU-based implementation. There is also a file called
kernel/, which contains a skeleton for the code that will run on the GPU. There
is also a file that gets run automatically at build time to compile the file
into a kernel.ptx file which gets downloaded to the GPU.
Note that in order to build the code that runs on the GPU, you must use the correct
version of the gcc compiler. Here’s a command you can use to set that up:
nvcc –compiler-bindir /usr/bin/gcc-6 -ptx
There’s a bash script in the kernel directory call setgcc that does this for you.
The command line for running your program is as follows:
cargo run –release — <mode> <cnn_file> <input_file> <output_file>
where <mode> is either “cpu” to run the CPU-based implementation or “cuda” to run
the GPU implementation. All the files are pathnames (unlike in the earlier Sudoku
example). You would typically use the following commands:
cargo run –release — cpu input/cnn.csv input/in.csv output/out.csv
cargo run –release — cuda input/cnn.csv input/in.csv output/out_cuda.csv
The program outputs the time spent doing “actual work”, i.e. converting the input
matrices to the output vectors. This measurement does not include i/o or the overhead
of initializing the GPU. As such, the time should be lower for the CUDA version than the
CPU version.
Generating Inputs and Checking Results
In addition to the starter code, we provide two Python scripts. One ( is
used to generate the input and CNN files and write them into the input directory as
“in.csv” and “cnn.csv”. The other script ( is used to compare the two files in
the output directory (“out.csv”, which is the output of the CPU version, and
“out_cuda.csv” which is the output of the GPU version). If your CUDA-based
implementation is correct, should not report any differences between those
two output files. Note that the output files will not be perfectly identical, which is why we
use a script to do the comparison.
The files generated by and the files compared by have fixed
names, so it’s recommended that you use the same names on the command lines that
you use to run the application.
The scripts are written in Python 3, so you can run them using the python3 command
(e.g. “python3”).
Implement your code on the GPU (40 marks) Your code needs to build correctly and
run on the GPU.
Produce correct results (40 marks) The script should not report any
Report (20 marks)
● 8 marks for a clear discussion of how your kernel works
● 8 marks for a clear discussion of how works with the kernel
● 4 marks for clarity

Lab 3 — Using the GPU
Open chat
Need help?
Can we help?