Testing and Debugging C Programs


Rate this product

ECE220: Computer Systems & Programming
Machine Problem 7
Testing and Debugging C Programs
Your task this week is to learn how to debug C programs. Specifically, you will use a debugger (the Gnu
debugger, GDB) to examine a C program and design test cases that expose bugs inside programs. You will
then debug the programs we provide and write a report on the debugging process. If you have yet to try the
tutorial in this week’s lab, we suggest that you do so to become familiar with GDB’s commands before
trying to solve the problems in the MP.
The objective for this week is for you to gain some experience with debugging programs in C, particularly
with GDB. This skill is critical for testing software.
Testing is an important part of software development. Software needs to be tested to make sure that it works
as intended. Bugs may hide in not-well-tested code for years and cause disastrous events. Some of the most
costly bugs and their causes are listed below:
Ariane 5 Flight 501:
The Ariane 5 rocket, Flight 501, launched on Tuesday, 4 June 1996, ended in failure due to an error in the
software design caused by assertions having been turned off, which in turn caused inadequate protection
from integer overflow. In essence, the software had tried to cram a 64-bit number into a 16-bit space. The
resulting overflow conditions crashed both the primary and backup computers (which were both running
the exact same software). The Ariane 5 cost nearly $8 billion to develop, and was carrying a $500 million
satellite payload when it exploded.
Morris worm:
The first internet worm (the so-called Morris Worm), developed by a Cornell University student for what
he said was supposed to be a harmless experiment, infected between 2,000 and 6,000 computers in less than
a day by taking advantage of a buffer overflow.
The specific code is a function in the standard input/output library routine called gets designed to get a
line of text over the network. Unfortunately, gets has no provision to limit its input, and an overly large
input allows the worm to take over any machine to which it can connect.
The graduate student, Robert Tappan Morris, was convicted of a criminal hacking offense and fined
$10,000. Costs for cleaning up the mess may have gone as high as $100 million.
Ping of death:
A lack of sanity checks and error handling in the IP fragmentation reassembly code makes it possible to
crash a wide variety of operating systems by sending a malformed “ping” packet from anywhere on the
internet. Most obviously affected are computers running Windows, which lock up and display the so-called
“blue screen of death” when they receive these packets.
The Task
You need to identify bugs within several buggy programs by using GDB. You need to document the GDB
commands that you use and the results that GDB produces in the file report.txt.
1. reverse
The first program that you are required to debug is the print reverse program. This buggy program is in the
mp/mp7/printRev subdirectory of your repository. You may look at all of the code for this particular
Your task is to document what the code does, how it works, and what arguments it takes. After doing so,
you must run the code repeatedly and identify at least three inputs for which the program does not work.
You must then fix the bug and document how you fixed it. You must document everything in
To get started, you can make the program (type “make”), and then run it in GDB by typing
gdb prev
Then type
r <your favorite word>
This command will run the program with your favorite word as a command-line argument. Use the skills
you learned in reading and trying the GDB tutorial (the first part of this document) to debug the program.
You may find it useful to write the output of the program into a file using the redirection operator, “>”:
./prev “argument” > out.txt
View out.txt to see that the output of the program has been written to that file.
2. primeNumber
The next program to debug is the primeNumber program. The correct version of the program can be
found on the course website:
The buggy program is contained in the mp/mp7/primeNumber subdirectory in your repository. The
is_prime function has been rewritten in a more efficient way than in the original code. However, the
implementation of is_prime function contains a bug. You may not see the source code for the new
is_prime function.
Your task is to reason about how the is_prime function is implemented and the possible cause of the
bug. To help you get started, you can use the following command to generate the executable:
Then start GDB by typing:
gdb primeNumber
Your task is to use GDB commands to figure out what the possible cause of the bug is inside the is_prime
function. Append your findings to the report.txt file that you created in part 1.

3. sort
The last program that you are required to debug is the sort program. This buggy program is in the
mp/mp7/sort subdirectory in your repository. You are given some of the code to look at, but the buggy
function is hidden. Your task is to first test this program, then describe the bug in your report.
The code implements a Heap Sort on an array of 32 bit integers. A Heap Sort is an in-place sorting algorithm
that is generally efficient. To learn about Heap Sort, you may want to read the description of the algorithm
To help you get started, use the following command to generate the executable:
You may then invoke GDB by:
gdb sort
and run the program by typing “run test1.txt” within GDB.
Then you should use GDB to analyze the program using runtime information. Because the buggy function
is hidden, you should use GDB to monitor the program when it calls into the functions that are visible to
you (those in sort.c).
In the report, document the GDB commands that you use and the erroneous intermediate values that you
find. Also, explain the possible cause of the bug.
There are three buggy programs for this MP: printRev, primeNumber, and sort.
printRev: All source code for printRev is provided to you. You may play with the code, however we
will only grade the report.txt. Changes to the source code will not count toward your grade.
prmain.c: The main file for printRev.
pr_buggy.c: This file contains the print_reverse function.
primeNumber: The buggy function is_prime is hidden from you. You may play with the source code
provided, but we will only grade report.txt. Changes to the source code will not count toward your
isPrime.h: This file contains the function definition for the is_prime function.
primeNumber.c: This file contains the main function and the helper function
divides_evenly called by the is_prime function.
sort: The main function and the buggy function heapSort are both hidden from you. You are provided
with the source code for helper functions that are called by the heapSort function.
sort.c: This file contains the helper functions.
test1.txt: This file is a sample input file.
For this MP, you are required to submit a file named mp/mp7/report.txt. For each of the three buggy
problems, you must first describe the error that the program produces. The description should at least
include test cases, the correct output, and the erroneous output.
After analyzing the program using test cases, you should analyze the program using GDB. In
report.txt, document the GDB commands you use to analyze the program, and also GDB output that
contains important information about the program status. Please note that you should not include all output
produced by GDB.
Finally, please describe briefly what the bug might be, and in the case of the printRev program, how to
fix it.
Compiling and Executing the Buggy Programs
You may use
to compile the buggy programs.
You may use
gdb {executable}
to use GDB to debug the buggy program.
Grading Rubric
We will only look at mp/mp7/report.txt to grade your MP.
Identifying the bug (30%)
For each buggy program, you need to report the test cases used to test the program, the desired output, and
the actual output of the program. You should report test cases for both correct executions and erroneous
Trace the bug (30%)
For each buggy program, you need to use GDB to trace erroneous executions of the buggy program. You
need to report the GDB commands you used and the results GDB produced. You should also analyze the
results GDB produced and the relationship between the results and the erroneous behavior.
Analysis of the bug (30%)
For each buggy program, you need to report what might be the root cause of the bug. For printRev, you
should also explain how to fix the bug.
Style (10%)
Your report should be formatted such that it is easy to read and follow.

Testing and Debugging C Programs
Open chat
Need help?
Can we help?